Startup / Operation - BOMANN KG 7327.1 Instruction Manual

Household fridge / freezer
Table of Contents

Advertisement

Available languages

Available languages

the hinge pin and inserted it from the other hinge
side.
• Put on the hinge cover* included in the scope of
delivery.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
• Connect the appliance to the power supply.
• Operate the temperature control. See also the
section "Settings".
Settings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1–7 ] regulate the different values
of the internal temperature.
Setting 0: Off state
Power level 1 + 2 :
lowest level → warmest internal temperature
Power level 3 + 4 :
medium level → optimal operating temperature
Power level 5 + 6 + 7* :
highest level → coldest internal temperature
*Beware of high setting because the maximum level
usually already means "freezing point".
The temperature of the freezer is automatically con-
trolled by the power level setting in the fridge.
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
During initial operation, adjust the coldest possible
temperature, until the appliance has reached the
desired operating temperature. Afterwards it is rec-
ommended to turn the control back to a medium set-
ting; correcting the temperature at a later point would
then be easier.
NOTE:
In generally a medium power level works best for an
optimized food storage. A high power level also in-
creases the energy consumption.
Interior light
When opening the fridge door, the interior light will
turn on automatically.
Storing food
NOTE: Recommendation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CAUTION:
Always pay attention to the storage instructions on
the sales packaging.
To avoid contamination of food, respect the following
instructions:
• Opening the door for long periods can cause a
significant increase of the temperature in the
compartments of the appliance.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

773271

Table of Contents