Midea COMPACT Series Service Manual page 23
Hide thumbs
Also See for COMPACT Series:
- Service manual (40 pages) ,
- Service manual (34 pages) ,
- Service manual (34 pages)
Table of Contents
Advertisement
Service Manual_2018-V1.0
11） Replace the compressor and welding the compressor
pipeline.-❿Welding the process pipeline.-⓫Welding the
low-pressure muffler.-⓬Welding the high-pressure
exhaust pipe.
12）Replace the filter, Cu-Fe tubes welding ⓭ used Ag
welding rod, Cu-Cu tubes welding ⓮ used Cu welding
rod.
13）Vacuum system,The degree of vacuum below 6Pa.
14）Perfusion refrigerant.
15）Use the vise grip pliers clamp the middle of the
process pipe, then seal welding process tube⓯⓰.
Condenser fan motor
Condenser fan motor
None
23
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the COMPACT Series and is the answer not in the manual?
Questions and answers
is there a setting to keep temp lite up all the time
No, the Midea COMPACT Series does not have a setting to keep the temperature light on all the time. The lighting turns on by default for 30 seconds after power on and will automatically turn off if not operated within that time. The light can be turned on or off manually using the Lighting mode key.
This answer is automatically generated