HP Elite Dragonfly G2 Maintenance And Service Manual page 58

Table 5-15 Display description and part number
Description
FHD, BrightView, 400 nits, WLAN/4G
FHD, antiglare, 1000 nits, privacy WLAN/4G
UHD, BrightView, HDR-400, WLAN/4G
FHD, BrightView, 400 nits, 5G
FHD, antiglare, 1000 nits, privacy, 5G
UHD, BrightView, HDR-400, 5G
Before removing the display panel, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
4. Remove the USB board
5. Remove the power button board
Remove the display assembly:
1. Disconnect the display cable from the system board (1).
2. Disconnect the antenna cables from the WLAN module (2).
3. Disconnect the display cable from the system board (3).
4. Disconnect the antenna cables from the WWAN module (4).
5. Disconnect the touch cable from the USB board (5).
6. Remove the four Phillips M2.5 × 4.0 screws (1) from each hinge.
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
(USB board on page 44).
(Power button board on page
30).
Battery on page 31).
45).
Spare part number
M42271-001
M42272-001
M42273-001
M44359-001
M44360-001
M44361-001
30).