Table of Contents
Advertisement
TROUBLE-SHOOTING
• Gun produces an uneven spray pattern or fan:
- Paint or film buildup on Air Cap blocking air holes.
Disconnect air supply and clean buildup from Air Cap.
• Gun "spits" or sputters; discharges large droplets:
- Paint or film buildup on Needle & Nozzle.
Disconnect air supply and clean buildup from Needle & Nozzle. Note: Use of solvent may be
helpful, removal of the Nozzle may be necessary.
• Gun draws only a small amount of paint or none at all:
- Clump or piece of paint film blocking Pickup Tube.
Disconnect air supply; remove Paint Cup and Pickup Tube. Remove blockage from Pickup
Tube then strain paint or coating to remove clumps or film.
ADDITIONAL AVAILABLE ITEMS
• #10041Z
• #12846Z
• #11455-11456
• #20403-20406 Coveralls
• #51687
• #12412
• #34113
• #12569
To order parts and supplies: 800.345.1178 >> eastwood.com
Eastwood PRE Painting Prep, Aerosol
Aerosol Injected Cleaner
Respirators
150cc Aluminum Cup
DeKups Adaptors
60 psi Respirator
Master Gun Cleaning Kit
7
Advertisement
Table of Contents
