Energy Saving And Optimum Operation; Available Main Operation Methods - Daikin VRV IV Q+ Series Installer And User Reference Manual

9 |

Energy saving and optimum operation

9 Energy saving and optimum operation
In this chapter

9.1 Available main operation methods

Installer and user reference guide
34
Observe the following precautions to ensure the system operates properly.
▪ Adjust the air outlet properly and avoid direct air flow to room inhabitants.
▪ Adjust the room temperature properly for a comfortable environment. Avoid
excessive heating or cooling.
▪ Prevent direct sunlight from entering a room during cooling operation by using
curtains or blinds.
▪ Ventilate often. Extended use requires special attention to ventilation.
▪ Keep doors and windows closed. If the doors and windows remain open, air will
flow out of your room causing a decrease in the cooling or heating effect.
▪ Be careful NOT to cool or heat too much. To save energy, keep the temperature
setting at a moderate level.
▪ NEVER place objects near the air inlet or the air outlet of the unit. Doing so may
cause a reduced heating/cooling effect or stop operation.
▪ Turn off the main power supply switch to the unit when the unit is not used for
longer periods of time. If the switch is on, it consumes electricity. Before
restarting the unit, turn on the main power supply switch 6 hours before
operation to ensure smooth running. (Refer to "Maintenance" in the indoor unit
manual.)
▪ When the display shows
person to clean the filters. (Refer to "Maintenance" in the indoor unit manual.)
▪ Keep the indoor unit and user interface at least 1 m away from televisions,
radios, stereos, and other similar equipment. Failing to do so may cause static or
distorted pictures.
▪ Do NOT place items under the indoor unit, as they may be damaged by water.
▪ Condensation may form if the humidity is above 80% or if the drain outlet gets
blocked.
This VRV IV replacement heat pump system is equipped with advanced energy
saving functionality. Depending on the priority, emphasises can be put on energy
saving or comfort level. Several parameters can be selected, resulting in the
optimal balance between energy consumption and comfort for the particular
application.
Several patterns are available and roughly explained below. Contact your installer
or dealer for advice or to modify the parameters to the needs of your building.
Detailed information is given for the installer in the installation manual. He can
help you to realize the best balance between energy consumption and comfort.
9.1 Available main operation methods ........................................................................................................................................
9.2 Available comfort settings......................................................................................................................................................
Basic
The refrigerant temperature is fixed independent from the situation. It
corresponds to the standard operation which is known and can be expected from/
under previous VRV systems.
(time to clean the air filter), ask a qualified service
34
35
RXYQQ8~20U7Y1B
VRV IV Q+ series heat pump
4P546229-1A – 2020.10