docomo nano UIM card
The docomo nano UIM card is an IC card
recorded user information such as your
phone number etc.
You can use the terminal with a docomo nano
・
UIM card. If you have a docomo mini UIM card,
UIM, or FOMA card, bring it to a docomo Shop
to replace it with a docomo nano UIM card.
When docomo nano UIM card is not inserted
・
to the terminal, making calls, packet
communication, etc. are not available.
For details on the docomo nano UIM card,
・
refer to the docomo nano UIM card manual or
NTT DOCOMO website.
Turn off the terminal before installing/
・
removing the docomo nano UIM card.
For opening/closing the cover of docomo
・
nano UIM card/microSD card slot, see "To
ensure waterproofness/dustproofness" (P.26).
Security codes of the docomo nano
■
UIM card
The docomo nano UIM card has the security
code of PIN code (P.49).
❖ Information
Please be careful not to touch or scratch the IC when
・
you handle the docomo nano UIM card. Doing so
may cause malfunction or damage.
Installing docomo nano UIM
card
Draw the cover of docomo nano
1
UIM card/microSD card slot (P.27).
Draw the tray straight to remove
2
from the terminal.
Tray
Set the docomo nano UIM card in
3
the tray with the IC face up.
Make sure that the corner cut of the
・
card is oriented properly.
Be sure to fit the docomo nano UIM
・
card into the tray so that it does not
shift.
Corner cut
Before Using the Terminal
IC
Tray
33