Table of Contents
Advertisement
❖ Note
Do not put a sticker etc. on the proximity sensor.
The back cover cannot be removed. Attempting to
remove the back cover with excessive force may
cause damage or malfunction.
The battery is built into the terminal and not removal.
docomo mini UIM card
The docomo mini UIM card is an IC card
recorded user information such as your
phone number etc.
You can use the terminal with docomo mini
UIM card. If you have a UIM or FOMA card,
bring it to a docomo Shop to replace.
When docomo mini UIM card is not inserted
to the terminal, making calls, packet
communication, etc. are not available.
For details on docomo mini UIM card, refer to
the docomo mini UIM card manual.
When inserting/removing the docomo mini
UIM card, make sure to power off the terminal
(P.37).
Security codes of the docomo mini
UIM card
There is a security code called PIN code in
the docomo mini UIM card. The code is set
to "0000" at subscription, which you can
change by yourself (P.165).
❖ Information
Please be careful not to touch or scratch a metal part
(IC) when you handle the docomo mini UIM card.
Doing so may cause malfunction or damage.
Inserting docomo mini UIM
card
Opening/closing docomo mini UIM card slot
cover (P.24)
Open the docomo mini UIM card
1
slot cover, then hook your
fingertip on the projection part of
the tray ( ) to pull the tray
straight out to remove it from the
terminal.
Tray
Before Using the Terminal
29
Advertisement
Table of Contents
