Sony XPERIA 1 Instruction Manual page 208

Click after mouse Set whether to click when the
pointer stops mouse pointer stops while
moving using a mouse.
Power button ends Set whether to end calls by
*
call pressing the power key.
Auto-rotate screen P.56
Touch & hold delay Set response time for operation
of touching and holding the
screen.
Vibration Set whether to vibrate the
terminal when you have an
incoming call or notification, or
tap the key icon.
･
Mono audio Set whether to play sound with
monaural.
Captions Set whether to display the
captions or set the language,
font size for captions.
High contrast text Set whether to show characters
clearly against the background
color.
* If the terminal goes into sleep mode during a call
with "Power button ends call" turned on, you can
end the call by pressing the power key or the volume
key to wake the terminal and then pressing the
power key again.
The terminal may vibrate
even when this setting is off
depending on application or
function.
Setting Text-to-speech output
From the Home screen, [apps
1
u
folder] [Settings]
u
[Text-to-speech output].
Preferred Select and set the engine for Text-to-
engine speech output.
Language Set language for Text-to-speech
output.
Speech rate Set speed at reading out text.
Pitch Set the pitch of voice to read out text.
PLAY Playback reading sample.
RESET Reset setting of "Speech rate" and
"Pitch" to the default.
❖ Information
To reading out the text with this function, download
･
the corresponding Text-to-speech output
application.
u
[Accessibility]
Settings
206