Sony XPERIA 1 Instruction Manual page 158

When the power of the terminal is turned on, the
･
terminal is restarted, or the software is updated,
unlock the screen lock and then hold over the reader
to use the Osaifu-Keitai service.
Note that when you do not subscribe to sp-mode,
･
some functions of Osaifu-Keitai compatible service
may not be available.
Locking Osaifu-Keitai function
You can restrict the use of Osaifu-Keitai
function and related services by locking
Osaifu-Keitai.
Setting "NFC/Osaifu-Keitai lock"
Restrict the function used by holding the
terminal during the screen lock.
Set "Screen lock" (P.198) or "Fingerprint
･
Manager" (P.200)
From the Home screen, [apps
1
u
folder] [Settings]
security].
Tap of "NFC/Osaifu-Keitai
2
lock".
Setting "Osaifu-Keitai lock (UIM
card)"
Lock Osaifu-Keitai function in docomo nano
UIM card.
u
[Lock screen &
From the Home screen, [apps
1
u
folder] [Settings]
u
security] [Advanced].
[Osaifu-Keitai lock (UIM card)]
2
.
Enter a password
3
When using "Osaifu-Keitai lock (UIM
･
card)" for the first time, enter a
password to set.
❖ Information
Note that you cannot cancel "Osaifu-Keitai lock (UIM
･
card)" if the battery runs out while "Osaifu-Keitai lock
(UIM card)" is set. Be careful about remaining battery
level. For canceling "Osaifu-Keitai lock (UIM card)",
charge the terminal before canceling.
"Osaifu-Keitai lock (UIM card)" password is not be
･
deleted even if you reset the terminal.
For unlocking "Osaifu-Keitai lock (UIM card)", use the
･
docomo nano UIM card which had been inserted to
the terminal when "Osaifu-Keitai lock (UIM card)" was
set.
NFC
■
NFC is an abbreviation for Near Field
Communication and a short range wireless
communication method of international standard
defined by ISO (International Organization for
Standardization). You can use a contactless IC card
function, Reader/Writer function, P2P function, and
others.
u
[Lock screen &
u
u
[NEXT].
Apps
156