Sony XPERIA 1 Instruction Manual page 43

Unfold the power plug of the AC
2
adapter and insert it into a power
outlet. Then place the terminal on
the desktop holder.
When charging is started with the
･
power on, the charging start sound is
heard and the notification LED of the
terminal turns on (P.59).
Check the position of the USB Type-C
･
jack of the terminal and then insert it
horizontally to the Type-C plug of the
desktop holder.
Notification LED
When charging is complete,
3
holding the desktop holder, lift the
terminal up to remove.
AC adapter
Desktop holder
Type-C plug
Remove the power plug of AC
4
adapter from the power outlet,
and then remove the Type-C plug
from the desktop holder.
❖ Note
Do not forcibly install the terminal. Doing so may
･
cause damage.
A terminal mounted on the desktop holder may be
･
damaged if pressed hard against the holder.
Attaching/Removing the attachment
Attaching
■
Check the shape of front/back of the
1
attachment and the attaching part of
the desktop holder, then fit the
attachment with the desktop holder.
Firmly press the attachment
2
straight into the desktop holder
and make sure that there are no
gaps between the attachment and
the desktop holder.
Before Using the Terminal
41