iOptron CEM70 Instruction Manual page 20

using the Azimuth Adjustment Knob and "◄" or "►" button (The "▲" and "▼" buttons are not
used here). Press ENTER to confirm.
(3) The telescope will now slew back to Star A to repeat above steps. The iteration can be stopped
when it is determined that the alignment error is at the minimum. Press BACK button to exit
alignment procedure.
NOTE: The movement of the alignment star in your eyepiece may not be perpendicular but crossed,
depends on its location in the sky.
STEP 9. Put the mount back into the package/carrying case
It is recommended to return the mount to Zero Position at the end of the observing session. Lay the
mount into the carrying case. Disengage the gear system for transportation and insert the Allen wrench into
RA yoke to lock the RA axis.
20