iOptron C70A Series Quick Start Manual
Center-balanced goto equatorial mount
Hide thumbs
Also See for C70A Series:
- Instruction manual (64 pages) ,
- Quick start manual (6 pages) ,
- Instruction manual (64 pages)
Advertisement
Quick Links
Quick Start Guide
CEM70™ Center-balanced GoTo Equatorial Mount
Models: CEM70 (#C70A series) & CEM70G (#C70AG series)
1
PACKAGE CONTENTS
Mount head – with iPolar
Hand Controller (HC) – Go2Nova® 8407+
Counterweight – 21 lbs (9.5 kg)
Stainless steel counterweight shaft
Built-in GPS module
Hand controller coiled cables
USB cable
AC adapter – 100-240V (DC output 12V/5A)
Hard case
Quick Start Guide (this document)
ONLINE RESOURCES (at www.iOptron.com, under Support)
User's Manual
Hand controller and mount firmware upgrades (check online for the latest version)
ASCOM and Commander for computer control
Discount coupon code for TheSky
1
The design, contents and packaging may change from time to time without notice.
TM
electronic Polar Scope, C70AG has an onboard iGuider
TM
Imaging Edition
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com
TM
guiding scope
1
Advertisement
Related Manuals for iOptron C70A Series
Summary of Contents for iOptron C70A Series
- Page 1 ASCOM and Commander for computer control Discount coupon code for TheSky Imaging Edition The design, contents and packaging may change from time to time without notice. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
- Page 2 Rotate the mount to align the screws to the tripod mounting holes. Insert the wrench into the holes on the base where azimuth locking screws are located. iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
- Page 3 HBX port on the mount base panel. Install telescope: CEM70 is equipped with a Vixen/Losmandy-D dual saddle. It can receive either a Vixen or a Losmandy-D plate. Release the dovetail iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
- Page 4 Set Zero Position: The Set Zero Position command registers the current position as zero position. So iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
- Page 5 System), then select an object of interest (e.g., Please contact support@ioptron.com for technical Moon). Press ENTER and the telescope will slew to support. the object and automatically start tracking. V1.0 iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | www.iOptron.com...
-
Page 6: Ioptron Two Year Telescope, Mount, And Controller Warranty
A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of- purchase satisfactory to iOptron.