Huawei SUN2000-196KTL-H0 User Manual page 77

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
User Manual
No. Parameter
5 Active power
change gradient
(%/s)
6 Derated by fixed
active power (kW)
7 Derated by active
power % (%)
8 Night-time reactive
power output
9 Enable reactive
power parameters
at night
10 Night-time reactive
power
compensation
(kVar)
11 Reactive power
change gradient
(%/s)
12 Plant active power
gradient (min/
100%)
13 Average active
power filtering time
(ms)
14 Power factor
15 Reactive power
compensation (Q/S)
Issue 02 (2020-10-30)
Description
Specifies the change speed of the
inverter active power.
Adjusts the active power output of
the inverter by fixed value.
Adjusts the active power output of
the inverter by percentage.
In some specific application
scenarios, a power grid company
requires that the inverter can
perform reactive power
compensation at night to ensure
that the power factor of the local
power grid meets requirements.
When this parameter is set to
Enable, the inverter outputs
reactive power based on the
setting of Reactive power
compensation at night.
Otherwise, the inverter executes
the remote scheduling command.
During the reactive power
compensation at night, the
reactive power is scheduled by
fixed value.
Specifies the change speed of the
inverter reactive power.
Specifies the rate of active power
rise due to sunlight changes.
Specifies the period of active
power rise due to sunlight
changes. This parameter is used
with Plant active power gradient.
Specifies the power factor of the
inverter.
Specifies the reactive power output
by the inverter.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
-
-
If this parameter is set to
100, the inverter outputs
based on the maximum
output power.
-
This parameter is displayed
when Night-time reactive
power output is set to
Enable.
This parameter is displayed
when Night-time reactive
power output and Enable
reactive power parameters
at night are set to Enable.
-
-
-
-
-
70