Huawei SUN2000-196KTL-H0 User Manual page 106

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
User Manual
N
o.
4
Issue 02 (2020-10-30)
Parameter Description
PV string N Set this parameter based on the type of the
access type PV string connected to DC input terminal
of the inverter. Currently, the options are as
NOTE
follows: Automatic identification (default
N is the DC input
value), Disconnection, Single PV string,
terminal number
of the inverter.
and 2 in 1.
You are advised to retain the default value.
If the value is incorrectly set, the PV string
access type may be incorrectly identified
and alarms may be generated by mistake
for the PV string connection status.
Copyright © Huawei Technologies Co., Ltd.
B String Access Detection
Remark
s
N
99