Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HWAM 3740
Summary of Contents for HWAM 3740
- Page 1 Users manual 3740 3760 01.11.2020 / 97-9705 www.hwam.com...
-
Page 3: Table Of Contents
Drawings ........... .4-8 HWAM SmartControl ®... -
Page 4: Drawings
Tel. (+45) 86 92 18 33 27-04-2020 nis Frigivet Format: 27-04-2020 nis Frigivet Format: Fax (+45) 86 92 22 18 Fax (+45) 86 92 22 18 1:10 HWAM 3740 manual Scale: Created by: Item: Scale: 1:10 HWAM 3740 manual Created by: Item: 21-04-2020... - Page 5 Page 5 of 20 pages...
- Page 6 Page 6 of 20 pages...
- Page 7 Page 7 of 20 pages...
- Page 8 Page 8 of 20 pages...
-
Page 9: Hwam ® Smartcontrol Tm
Congratulations on your new wood-burning stove complete with a HWAM SmartControl ® We are pleased that you have chosen a HWAM woodburning stove and confident that it will give you much pleasure. The HWAM SmartControl is a digital control of the combustion in your new wood-burning stove. The ®... -
Page 10: Installation
In general Congratulations on your new HWAM woodburning stove. We are pleased that you have chosen a HWAM woodburning stove and confident that it will give you much pleasure. To ensure optimum operation and safety, we recommend that the installation should be carried out by an authorised HWAM retailer or a fitter recommended by the retailer. - Page 11 The chimney and flue duct must be of flue class T400 and be CE marked. Furthermore, it must have obtained the classification of G in soot fire testing. The required distance to combustible material must be complied with in accordance with the brand label. Ask your HWAM retailer for further information.
- Page 12 16. Installing the external heat shield (1). Replace the heat shield (1) at the back of the stove. Changing the smoke outlet from top outlet to back outlet - HWAM 3760 (drawing D) If a wood-burning stove from the factory is supplied with a top outlet but you want to change it to a back outlet, this can be done by following the instructions below.
- Page 13 • Built-in pipe sleeve (12). Fits smoke flue. • Wall rosette (13). Covers disruption to wall around pipe sleeve. • Joint (14). Sealed with packing material. • Smoke outlets (15) of the HWAM stove. • Smoke flue regulating damper (16). • Soot door (17).
- Page 14 If the chimney is too tall to be cleaned from above, it must be equipped with a soot door. In case of a chimney fire and overheating, the HWAM SmartControl will enter a security mode and ®...
-
Page 15: Firing Manual - Wood
IrIng MAnuAl Wood Your first heating session The lacquer will be fully hardened after the stove has been used, and the door and the ashpan should be opened very carefully as there will otherwise be a risk that the gaskets will stick to the lacquer. In addi- tion the lacquer may initially give off an unpleasant odour, so make sure that the room is well ventilated. - Page 16 The HWAM SmartControl ® ® will signal that a restoking is due at the flue gas temperature of 180° C, and at 100° C the HWAM ® SmartControl will enter standby mode and all dampers will close.
- Page 17 Stoking When alarm for restoking sounds the stove is ready for restoking. The alarm for restoking will come via the room temperature sensor or the acquired remote control. The app IHS Smart Control will also come with a notification that it is time for restoking if the app is opened. For more information on the app, see details in separate manuals for the app IHS Smart Control or in the Quickguide.
-
Page 18: Firing In General
® combustion. A good combustion is achieved when the fire gets the right amount of oxygen supply at the right time and place in the combustion chamber. The HWAM SmartControl allows for variations ®... -
Page 19: Maintenance
AIntenAnCe Cleaning Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other kind of cleaner, as this will damage the lacquer. - Page 20 Surface Usually, it is not necessary to any treatment to the painted surfaces of the wood-burning stove. Any damage to the paint may, however, be remedied with spray paint, which can be bought from your stove retailer. Guarantee The guarantee does not cover damage due to insufficient maintenance! Maintenance Alarms If a maintenance alarm goes off, you can continue using the wood-burning stove, but contact your dealer as soon as possible.
-
Page 21: Operational Problems
perAtIonAl probleMS Blackened glass • The wood is too damp. Only use wood stored for at least 12 months under cover and with a moisture level not exceeding 12-18 % RH. • Faulty seal in door. Fit new seal. Smoke in the room when opening door •... -
Page 22: Declaration Of Performance
The DoP can be downloaded from our website via the following links: www.hwam.com/dop/3700ihs Page 22 of 20 pages... -
Page 23: Product Information Ecodesign
• Always dispose of items in a way that is as sustainable as possible and that is in line with the current environmental protection, reprocessing/recycling and disposal technology HWAM A/S • Nydamsvej 53 • DK-8362 Hørning Page 23 of 20 pages... - Page 24 www.hwam.com...
Need help?
Do you have a question about the 3740 and is the answer not in the manual?
Questions and answers