Hilti TE 50 Manual page 21

Status
The service indicator blinks red.
Note
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.
3.6 Items supplied
Power tool, side handle, operating instructions, depth gauge, Hilti toolbox, cleaning cloth, grease.
Note
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com.
4 Technical data
4.1 Combihammer
Note
For details of the rated voltage, current, frequency and input power, please refer to the power tool's
country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the tool. The operating voltage of
the transformer or generator must always be within +5% and -15% of the rated voltage of the tool.
Weight in accordance with EPTA procedure 01
Single impact energy
EN 60745 protection class
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Sound (power) level
Sound pressure level
Uncertainty
Information about vibration
Drilling in metal (a )
h, D
Hammer drilling in concrete (a
Chiseling (a )
h, Cheq
Uncertainty (K)
Printed: 08.03.2017 | Doc-Nr: PUB / 5070996 / 000 / 03
Meaning
• The product is faulty. Have the product repaired
by a trained electrical specialist.
)
h, HD
TE 50 TE 50-AVR
5.7 kg 5.8 kg
5.2 J 5.2 J
II II
TE 50 TE 50-AVR
106 dB 104 dB
95 dB 93 dB
3 dB 3 dB
TE 50 TE 50-AVR
2.5 m/s² 2.5 m/s²
16.1 m/s² 11.4 m/s²
11.3 m/s² 8.1 m/s²
1.5 m/s² 1.5 m/s²
English 15