Parameter Menu - Emerson DIXELL XR30T Installing And Operating Instructions

- Move to the second char position (segment in the middle) and swipe-up or down until char "d"
appears
- Move on the third char position (segment on the right) and swipe-up or down until char "F" appears
- Enter the par. value by touching the PRG icon for 3 sec.
NOTE: pay attention to the upper or lower case when browsing through the available characters.
For simplicity, here is the complete list of available characters: A, b, C, d, E, F, G, H, i, L, M, n, o, P, q, r, S, t,
u, V, Y, 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9.

4.11 PARAMETER MENU

When in Programmin Menu, it is possible to enter the Parameter Menu touching the PRG icon for 3 sec.
The Prog Level 1 icon will indicate the first level of the programming menu (group labels).
The Browsing icon will indicate that there are other groups of parameters.
When in PROG LEVEL 1, it is possible to browse through the available groups of parameters by using the H-
swipe gesture. The circular construction of this menu permits to move left or right through the groups.
Here are the available groups:
Group Label Description
rEG Main regulation parameters
Prb Probe configuration parameters
diS Visualization parameters
dEF Defrost configuration parameters
FAn Evaporator and condenser fan configuration parameters
AUS Auxiliary regulator parameters
ALr Alarm configuration parameters
oUt Digital and analogue output configuration parameters
inP Digital input configuration parameters
ES Energy saving configuration parameters
Cnt Counters, read only values
rtC Real Time Clock configuration parameters
E2 Memory storage management
1592040000 XR30-60-70T EN v1.3 2020.08.26
...
XR30-60-70T 12/40