Page 1
Making wireless happen www.poynting.tech XPOL-2 - User Guide South Africa Europe Unit 4, N1 Industrial Park Kronstadler Straße 4, Landmarks Ave 81677 München Samrand, 0157, Germany South Africa Tel: +49 89 2080 265 38 Tel: +27 12 657 0050 Mob.: +49 176 529 733 50 info@poynting.tech...
Packing Check List Item Description Quantity A-XPOL-0002-V2 Antenna Only M6x60mm U-Bolt ss Econo Bracket ss M6 Nuts ss M6x12mm Bolts ss M6 Washers ss Z-Bracket Backing Plate A-XPOL-0002_PCL...
Page 5
The appearance of each component Antenna Unit M6x60mm U-Bolt ss Econo Bracket ss M6 Nuts, Bolts and Washers Z-Bracket Version: 3.0...
Page 6
Tools Required Tools that may be required: 6mm Masonry drill bit Impact drilling machine Screw driver-Cross slot/Philips Hammer A-XPOL-0002_PCL...
Introduction XPOL-2 is a unique pole mountable, high gain, CPE antenna. It can be mounted outdoors on a pole of up to 50mm in diameter. Follow the instructions below for installation. Mounting Configurations: 1. Pole Mounting • Lay the antenna out at the installation site and assemble the antenna on the ground.
Antenna Alignment • Use appropriate equipment (signal meter or App) to locate the nearest cellular tower in your location as well as the greatest signal strength for the antenna to draw upon. • Once you have located the tower, point the main center beam of your antenna in the gener- al direction of the cell tower.
Antenna Mounting Precautions • Place the antenna at the highest point possible and ensure that there aren’t any surrounding obstructions to the antenna. • In order to avoid communication interference, ensure that the antenna is placed at least 0.5m away from other antennas and metal objects.
Page 10
Cable Routing Safety • If you are installing an antenna for the first time or unsure about how to install your antenna, obtain the help of a professional installer. • Carefully survey the installation site before installation to locate secure handholds, dangerous conditions (such as power lines and weak roofs) and the safest and most convenient placement for ladders if...
Page 11
Safety 4. Avoid operating while under the influence of drugs, alcohol or medication. 5. Make sure that any loose fitting jewellery or clothing is secured and tie back long hair as they can get caught in moving parts during installation. 6.
Need help?
Do you have a question about the XPOL-2 and is the answer not in the manual?
Questions and answers