Redback MOWRO RM24 Operation Manual page 15

Operation
Setting the Mow Area
Note: Roughly measure the size of your lawn to determine its area.
1) Unlock the mower. (If locked, see steps 1-7 in the Unlocking the Mower section.)
2) Press the "Set" button until the meters squared icon is showing at the top of
the LCD screen.
3) Use the up and down arrows located on the "Home" and "Start" to increase
or decrease the mowing area.
4) Press the "Set" button to save your mowing area.
Setting the Start Time
Note: The start time function will not work unless the clock time is set correctly on
the mower. (See "Setting the Clock" Section)
Note: THE CLOCK IS FORMATTED TO MILITARY TIME.
1) Unlock the mower. (If locked, see steps 1-7 in the Unlocking the Mower section.)
2) Press the "Set" button until the hourglass icon is showing at the top of the
LCD screen.
3) Upon reaching the hourglass icon, the fi rst number in the sequence will
be blinking.
4) Press the up and down arrows located on the "Home" and "Start" buttons
to change the number.
5) Press the "OK" to shift to the next number in the sequence, and set the time
you want the mower to start.
6) Once time is set, press the "OK" button until none of the numbers in the
sequence are blinking, then press the "Start Button".
7) The mower will begin mowing the area of your lawn.
Note: The mower will begin its fi rst session immediately, once
the "Start" button is pressed manually. Scheduled mowing set
by the user will begin 48 hours after the initial manual session
has completed.
15