Classe Audio Delta STEREO Owner's Manual page 5

custom installations Drawings are included in this manual to facilitate special installations and
serial number The serial number for your power amplifier is found on the rear of the unit.
operating voltage The operating voltage of your Delta STEREO is indicated on the rear of the
Warning:
warm up/break-in period Your new Classé power amplifier will deliver outstanding performance
please read this manual... Please take a few minutes to review this manual, and to familiarize yourself with
custom cabinetry (see the section Dimensions). Contact your Classé dealer for
more information.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.
unit. Do NOT connect the amplifier to AC mains power of different line
voltage.
There are no user-serviceable parts within the unit. Please
refer any problems to an authorized Classé service center.
The amplifier can easily be powered by a normal 15 or 20-amp AC mains line.
If other devices are also powered from the same AC line, their additional power
consumption should be taken into account.
immediately. However, you should expect to hear it improve somewhat as
it reaches its normal operating temperatures and its various components
"break-in." It has been our experience that the greatest changes occur within the
first 72 hours, as the amplifier reaches thermal equilibrium and the capacitors
fully form. After this initial break-in period, the performance of your new
amplifier should remain quite consistent for years to come.
your new amplifier. We understand that you are anxious to plug everything in
and get started. However, reading this manual and following the advice it gives
will ensure that you get all the benefits you deserve from having purchased such
a fine piece of equipment.
5