Operation; Location And Function Of Controls - Friedrich CP06E10 Service And Parts Manual

Operation

• DESIGNED FOR COOLING ONLY
• POWERFUL AND INCREDIBLE COOLING
• TOP-DOWN CHASSIS FOR THE SIMPLE INSTALLATION AND SERVICE
• BUILT-IN ADJUSTABLE THERMOSTAT
• WASHABLE ONE-TOUCH FILTER
• COMPACT SIZE

Location and Function of Controls

CAUTION: If you turn off the air conditioner or switch from cooling to the fan, wait
at least 3 minutes before setting to cooling again.
Operation
Thermostat
5
4
3
2
1
FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark (the mid-point is a good starting
position). If the room temperature is not satisfactory after a reasonable time, adjust the con-
trol to a cooler or warmer setting, as appropriate.
FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest temperature mark.
FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
O ff
Me d Fa n - Med speed fan operation without cooling.
Low Fa n
High C ool - Cooling with high speed fan operation.
Me d C ool - Cooling with med speed fan operation.
Low C ool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
6
Turn the knob so that arrow points to the larger marks for greater cooling.
7
Point the arrow to the smaller marks for more moderate cooling.
(i.e. the higher the number, the greater the cooling)
8
9
- Turns air conditioner off.
- Low speed fan operation without cooling.
Operation
Service Manual 13