L2 Repair Document
6.3 Disassembly process
(1) The steps of disassembly 8085 are as below.
Step1: Take off the back cover by using plastic flake.
Note: disassembly the back cover along the direction of the arrow. Be careful not to damage the side
key FPC.
Rev.
1.0
ONETOUCH 8085+LKB001X/A
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
TCL
Don't disassembly from
this side, as it will
damage the Dock pin
Level 2 Repair Document
Communication Ltd.
Page
38/71