Usb Board - HP ProBook 635 Aero G7 Maintenance And Service Manual

3. Remove the power connector cable from the computer (4).
Reverse this procedure to install the power connector cable.

USB board

To remove the USB board, use this procedure and illustration.
Table 6-7 USB board description and part number
Description
USB board
USB board cables (included in Cable Kit)
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the USB board:
1. Disconnect the smaller cable from the USB board (1).
2. Disconnect the larger cable from the ZIF connector on the USB board (2).
3. Remove the three Phillips M2.0 × 4.0 screws (3).
(Preparation for disassembly on page
(Bottom cover on page 31).
31).
Battery on page 38).
Component replacement procedures
Spare part number
M30670-001
M30646-001
45