Philips EasyClean FC8740 Manual page 15

5 Empty the dust bucket into the dustbin.
You can clean the dust bucket with cold tap water and some washing-up
liquid.
6 Put the filter cylinder case back into the dust bucket and put the
bucket back into the appliance.
Make sure you have inserted the filter cylinder into the filter cylinder
case, otherwise it is not possible to close the dust bucket retainer.
Cleaning and maintenance of filters
Filter cylinder
Clean the filter cylinder every week.
1 Remove the dust bucket from the appliance, unlock the filter cylinder
lock (1) and lift the filter cylinder out of the filter cylinder case (2).
 Clean the filter cylinder with the brush supplied. Brush from the top
of the filter cylinder downwards along the ribs.
Only use the brush supplied! Other brushes may damage the filter
cylinder.
 Remove the filter cylinder case from the dust bucket.
 If there is any dirt on the inside of the filter cylinder case, empty the
case over a dustbin.
5 If necessary, clean the filter cylinder case with cold tap water and
some washing-up liquid.
6 If you want to wash the filter cylinder, wash it thoroughly with only
water.
Do not use any soap, washing-up liquid or other detergent to clean the
filter cylinder. Let the filter cylinder dry completely before you reinsert it
into the case.
7 Unlock the filter cylinder lock and put the filter cylinder back into
the filter cylinder case.
8 Put the filter cylinder case back into the dust bucket and put the
dust bucket back into the appliance.
English
15