Philips EasyClean FC8740 Manual page 13

Combination nozzle (specific types only)
You can use the combination nozzle on carpets (with the brush strips
folded in) or on hard floors (with the brush strips folded out).
1 To clean hard floors, push the rocker switch on top of the
combination nozzle with your foot. The brush strips come out of the
nozzle housing.
 To clean carpets, push the rocker switch again to make the brush
strips disappear into the nozzle housing again.
using the appliance
1 Pull the cord out of the appliance and put the mains plug in the wall
socket.
 Press the on/off button to switch on the appliance.
- During vacuuming, you can adjust the suction power with the suction
power knob.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
- If you want to pause for a moment, insert the ridge on the nozzle into
the parking slot to park the tube in a convenient position.
English
1