Replacing The Filter - Philips AC3833 User Manual

7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
for 3 seconds to reset the filter cleaning time�
» The screen displays a message "Filter cleaning
completed"�
10
Wash your hands thoroughly after cleaning the filter�

Replacing the filter

Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure
that the air purification filter is in optimal condition when the air purifier is
operating� When the filters need to be replaced, the filter replacement alert
lights up red�
If the filter is not replaced in time, the air purifier will pop up a message to
indicate that the filter needs to be replaced, then the air purifier will stop
operating and automatically lock to protect the air quality in the room�
Replace the filters as soon as possible according to the filter code�
Replacing the filter
PM2.5
IAI Gas
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before
replacing the filter�
Filter alert light status
The filter replacement alert
lights up
Change lter Change lter
then long then long
press press to to
reset lter reset lter
Action
Replace the NanoProtect filter Pro S3
(FY4150/00)
Filter
cleaning completed.
EN
35