Philips 4000i Series Quick Start Manual

Mars
TFT_AC3854/AC3858
Connectivity
You can use the app to control the puri er and check air
quality. Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press
the "+" button to connect your device. Please follow the
steps in the app.
Control
Power Filter status/ Display
reset switch
PM2.5
Gas
IAI
Display
Auto mode Turbo mode
Wi-Fi Filter cleaning
indicator alert
IAI
Gas
Gas Indoor allergen
indicator index
Gas index Allergen index
from L1-L4, 1-12, 1 indicates
L1 indicates best air quality
best air quality
CEE_EN
Mode Light
switch on/o
Auto
Turbo
Sleep
Sleep mode
Filter replacement
alert
PM2.5
PM2.5 Air quality
indicator light
Good Fair Poor Very poor
Maintenance
1
PM2.5
IAI Gas
2
2
NanoProtect lter Series 3 (FY4440/30)
2
When display shows
PM2.5
IAI Gas
2
Time to clean the NanoProtect lter Series 3
When display shows
PM2.5
Time to replace the NanoProtect
IAI Gas
2
lter Series 3
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
3000 038 71833-1