Sleep Mode
Switching the display indicator
Note: The PM2�5 level is displayed on the central of the screen by default�
PM2.5
IAI
Gas
2
1
Touch the
button once to switch the display indicator�
2
Touch and hold the
PM2�5/Gas/ IAI level�
Using the light on/off function
PM2.5
IAI
Gas
2
With the light sensor, the control panel can automatically turn on, turn off or
dim according to the ambient light� The control panel will be off or dim when
the ambient light is dark� You can touch any button to wake up all lights� Then,
if no further operation, all lights will be off or dim again to match with the
ambient light�
You can touch the light on/off button
control panel� Touch any button to wake up all lights�
Sleep mode (
)
In Sleep mode, the air purifier operates quietly at
a low speed� After 3 seconds, the screen lights off�
Particulate
Matter 2.5
3s
button for 3 seconds to check the explaination of
manually to turn off all lights and the
EN
31