Walinga ULTRA-VAC 5614D Manual page 37

5.1.3 SERVICING INTERVALS
8 Hours or Daily
1. Check the tension and alignment of the input
drive belts. (fig. 5-3)
See Maintenance Section.
2. Check the oil level in the blower reservoirs (2
locations).
Fig. 5-1 Blower End Views
Fig. 5-2 Gear End
40 Hours
1. Lubricate the exposed rod end of the boom lift
cylinder with "never seize" (1 location).
2. Lubricate the splined input shaft and bearings
(2 locations)
Fig 5-3 Drive End
33