Operating Safety - Walinga ULTRA-VAC 5614D Manual

2.2 OPERATING SAFETY

1. Read and understand the Operator's
Manual and all safety signs before using.
2. Place all controls in neutral, stop the
engine, remove ignition key and wait for all
moving parts to stop before servicing,
adjusting, repairing or unplugging.
3. Do not operate when any guards are
damaged or removed. Install and secure
guards before starting.
4. Keep hands, feet, clothing and hair away
from all moving and/or rotating parts.
5. Do not allow riders on the Ultra-Vac® or
towing vehicle during operation or
transporting.
6. Clear the area of all bystanders, especially
small children, before starting.
7. Stay away from overhead obstructions and
power lines when extending boom and
during operation and transporting.
Electrocution can occur without direct
contact.
8. Keep away from unloading boom when
moving, adjusting or setting. Keep others
away.
9. Clean reflectors, signs, and lights before
transporting.
10. Do not operate with leaks in the hydraulic
system.
13. Wear appropriate ear protection when operating
or long periods of time.
11. Do not place intake nozzle near feet when
standing on the top of grain.
12. Before applying pressure to the hydraulic
system, make sure all components are tight and
that steel lines, hoses and couplings are in good
condition.
13. Review safety items with all personnel annually.
11