Et system LAB-HP/E Series Manual page 19

LIMI - Limit I
a
With this command the user can read the maximum adjustable current limiting.
Example: 300A unit, I was adjusted to 200 A via configuration menu
limit
LIMI Query of maximum adjustable current
LIMI,200.0A Unit answers: I
LIMU - Limit U
a
Reads maximum adjustable voltage limitation. This command requests the previously defined maximum output
voltage.
Example: 300 V unit was adjusted to 200 V via configuration menu
LIMU Query of maximum adjustable current
LIMU,200.0V Unit answers: U
MI[,<Nr>] - Measure I
a
This command measures the present output current.
Example:LAB/HP/E 15100 (100VDC; 150A)
GTR Remote operation
OVP,140 Over voltage protection 140 V
UA,100 Output voltage 100 V
IA,50 Output current 50 A
SB,R Output open
MI Measures present output current
MI,50.0A Unit answers: 50,0 A
MU[,<Nr>] - Measure U
a
This command shows the measurement value of the present output voltage.
Example:LAB/HP/E 15100 (100VDC; 150A)
GTR Remote operation mode
OVP,140 Over voltage protection 140 V
UA,10 Output voltage 10 V
IA,1 Output current 1 A
SB,R Output open
MU Measures present output voltage
MU,10.0V Unit answers: 10,0 V
ET System electronic GmbH
= 200,0 A
limit
= 200.0 V
limit
Universal interface
13