Anti-vibration system
!
WARNING!
The fuel used in the chainsaw has the
following hazardous properties:
1. The fluid and its fumes are poisonous.
2. Can cause skin irritation.
3. Is highly inflammable.
Dismantling
1. Dismantle the following parts:
•
Chain and bar. See the Operator's Manual.
•
Cylinder cover. See the Operator's Manual.
•
Tank unit and front handle. See page 40.
2. Remove the spring on the cylinder with a 4 mm Allen
key. See fig. 1.
3. Remove the springs on the tank unit with a 4 mm
Allen key. See fig. 2.
Cleaning and inspection
Clean and inspect all parts.
Assembly
1. Fit the springs on the cylinder and tank with a 4 mm
Allen key. See fig. 1 and fig. 2.
Note! Harder springs are available. Should only be
used together with longer guide bars. See IPL for part
number.
2. Assemble the following parts:
•
Tank unit and front handle. See page 41.
•
Cylinder cover. See the Operator's Manual.
•
Chain and bar. See the Operator's Manual.
42 – English
ANTI-VIBRATION SYSTEM
Fig. 1
Fig. 2