Husqvarna 570 Workshop Manual page 37

Refitting to the chainsaw
See fig. 20 and 21.
1. Mount the filterholder with carburettor and choke
system. Connect the rear rubber mounts (H).
Check that the choke is fitted in the right position in
the partition. See page 47, fig. 15.
2. Mount 4 bolts (G) which secure the filter holder,
carburettor and choke system.
3. Mount the fuel pipe (B).
4. Connect the throttle cable (A).
5. Connect the switch wires (E and F).
6. Mount the carburettor control (D).
7. Fit the cylinder cover and air filter. See the
Operator's Manual.
CARBURETTOR
Fig. 20
Fig. 21
G
H
B
E
D
F
H
A
English – 37