Husqvarna 570 Workshop Manual page 16

Throttle lock
Lower the rear of the tank by removing the screws A, B
and C. See fig. 15.
Remove the screw A on hand grip insert. See fig. 16.
Remove the handle insert (A). Remove the guide pin for
the throttle (B) and throttle lock (C) using a punch. See
fig. 17.
Press apart with a screwdriver or the like, the throttle
lock/control and take out the throttle lock from the recess
in the hand grip. See fig. 18.
Now remove the spring.
16 – English
SAFETY EQUIPMENT
A
Fig. 15
Fig. 16
Fig. 17
Fig. 18
B
C
A