Technical Specifications - d&b audiotechnik SL Series Manual

KSL8: Frequency response*, Standard and CUT modes
*single cabinet within array
KSL12: Frequency response*, Standard and CUT modes
*single cabinet within array
10

2.5 Technical specifications

System data
Frequency response (–5 dB standard)
Frequency response (–5 dB CUT mode)
Max. sound pressure (1 m, free field)
KSL8
KSL12
Loudspeaker data
Nominal impedance front LF
Nominal impedance side LF/MF/HF
Power handling capacity front LF (RMS/peak 10 ms)
Power handling capacity side LF/MF/HF (RMS/peak 10 ms)
Nominal dispersion angle (horizontal) KSL8/KSL12
Splay angle setting
Components
2 x 1.4" exit compression driver with 3" coil
Connections
Pin assignment
2+: Side LF/MF/HF+/2–: Side LF/MF/HF–
Weight
54 Hz - 18 kHz
75 Hz - 18 kHz
145 dB
144 dB
(SPLmax: Broadband signal IEC 60268)
450/1800 W
250/1000 W
80°/120°
0 ... 10° (1° increment)
2 x 10" front LF driver
2 x 8" side LF driver
1 x 8" MF driver
Passive crossover network
NLT4 F/M
1+: Front LF+/1–: Front LF–
58 kg (128 lb)
d&b KSL8/KSL12 Manual 1.2 en
8 ohms
8 ohms