Advertisement
ASSEMBLY INSTRUCTION FOR MAXI ULTRA-315C
2 x GABLES
1 x BACKING BOARD
3 x FIXED SHELF
NO
MODEL
DESCRIPTION
1
CONFIRMAT SCREWS
2
CAPS
3
SUPPORT PINS
4
BACKING NAILS
PARTS IDENTIFICATION LIST
A
E
F
FOLD LINE
C ,D & E
QTY
20
20
4
75
WALL
TOP of UNIT
When attaching unit to wall put safety bracket in
middle of unit with 16 Pan head screw then 25mm
Pan head screw into wall.
For plasterboard without a stud it is recommended
to use a plug with screw (not provided).
1 x ADJUSTABLE SHELF
1 x BOTTOM KICK
NO
MODEL
5
6
7
H
B
DESCRIPTION
16 PAN HEAD SCREWS
25mm PAN HEAD SCREWS
"L" SAFETY BRACKET
QTY
1
1
1
Advertisement
Table of Contents
Related Manuals for Multistore MAXI ULTRA-315C
Summary of Contents for Multistore MAXI ULTRA-315C
- Page 1 ASSEMBLY INSTRUCTION FOR MAXI ULTRA-315C WALL TOP of UNIT When attaching unit to wall put safety bracket in middle of unit with 16 Pan head screw then 25mm Pan head screw into wall. For plasterboard without a stud it is recommended to use a plug with screw (not provided).
- Page 2 NEXT YOU WILL NEED TO RETRIEVE THE INFILL FROM PART 2, USING 3 X 30mm SCREWS PROVIDED, ATTACH THE INFILL TO THE UNDER-SIDE OF THE MIDDLE FIXED SHELF. When attaching unit to wall put safety bracket in middle of unit with 16mm pan head screw then 25mm pan head screw into wall.
- Page 3 HOW TO ASSEMBLE YOUR 5—DRAWER MODEL DESCRIPTION NO MODEL DESCRIPTION CONFIRMAT SCREWS CAMS DOWELS CAM PINS BACKING NAILS 30mm 8 GAUGE INFILL SCREW 5/8 X 6 WOOD SCREWS EURO SCREWS HANDLES INFILL RUNNERS PER SET STEP1. LAYOUT YOUR DRAWER PIECES FLAT AS PER DESIGN WITH PRE-DRILLED HOLES FACING UP. START WITH THE BACK OF THE FRONT DRAWER AND PLACE YOUR DOWELS &...
- Page 4 DRAWER ASSEMBLY STEP 3. STEP 4 YOUR DRAWER SHOULD BE FACING DOWN WITH THE FRONT DRAWER EXSPOSING THE CUTOUT FOR THE BASE TO BE PUSHED INTO FACE DOWN WITH THE BROWN SIDE SHOWING. MAK- ING SURE YOU HAVE THE DRAWER SQUARE, PROCEED TO NAIL DOWN THE BASE SPACING THEM OUT AROUND THE EDGE OF THE THREE SIDES.
- Page 5 INSTRUCTIONS FOR RUNNER PLACEMENT DIAGRAM 1 Executive Series ● ● Models Hole Positions Fixed Shelf Position ● ● EXC – 4J 1 – 8 – 15 - 22 ● ● EXC – 5C 1 – 8 – 15 – 20 – 25 ●...
- Page 6 Multistore Industries (Aust) directly on (07) 3208 6799 and state date of pur- chase, place of purchase and proof of purchase. Multistore Industries (Aust) will replace any faulty or defect parts at no cost to the • customer. A replacement will be sent to you as soon as possible, or product can be exchanged at the store of purchase.
Need help?
Do you have a question about the MAXI ULTRA-315C and is the answer not in the manual?
Questions and answers