All safety and operating notice signs on the machine are to be kept in a clearly legible condition at all times. Da- maged or illegible signs are to be replaced immediately. 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
Page 4
Max. incline with a cab width, for example, of 4.25 m = 5 cm for example, of 2.2 m = 8 cm Figure - 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
. Raised 600 mm. Ready for the truck connection shaft). to be driven under it (excluding con- nection shaft). Dismantle following the above procedure in reverse. 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
Then align the container by adjusting each support separately. The supports can now be extended indivi- dually with the ratchet cranks fitted and the container raised to the required level. 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
Safety instructions have to be observed. – The disposal of the product and its components has to be according to environmental standards. 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
Page 10
4.2 Remove the handle (57). 4.3 Unscrew the nut (56). 4.4 The parts can now be removed. Assemble the parts following the above instructions in reverse. 094204_c_gb_hebvrr_v haacon hebetechnik gmbh – Phone +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 8466...
Need help?
Do you have a question about the 1889.5 and is the answer not in the manual?
Questions and answers