MSA ALTAIR4 Quick Start Card

®
Please review the back of this card for a detailed illustration
of the following components:
1 Button
Turn the instrument ON with the
warm up and show info & setpoints.

FAS: to accept press

Page through screens with
Operation screen.
Reset Alarm or PEAK and STEL values press
To perform a Bump Check, press
To Calibrate: ensure you are in fresh air and press the
button in Normal Operation mode for more than three
seconds.
To activate / deactivate MotionAlert feature (if equipped),
page through screens until MotionAlert screen and press
button.
Turn the instrument OFF by holding the
This quick start card provides only a brief description of the
operating instructions for the ALTAIR 4 Multigas Detector
Alarm. The user of this instrument must be fully aware of the
limitations and instructions supplied in the operating
instruction manual. Failure to follow the instructions may lead
to serious personal injury or death.
709 Rev. 0
Multigas Detector Quick Start Card
2 Button

WARNING

1-800-MSA-2222 / www.MSAnet.com
3
, to cancel press
button from the Normal
TM
Button
button. Instrument will
.
on Bump page.
button.
button
10088365