Installing Book Cards And Selecting Books - Franklin BOOKMAn WGM-2037 User Manual

Installing Book Cards
Warning: Never install or remove a
book card when BOOKMAN is on. If
you do, information that you entered
in its built-in book and in an installed
card will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the book
card with the notches in the
slot.
4. Press the book card until it
snaps into place.
Removing Book Cards
Warning: When you remove a
book card to install another,
information that you entered in the
removed book card will be erased.
Selecting Books
Once you have installed a book card
in your BOOKMAN, you must select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
Resuming Where You Left Off
You can turn off BOOKMAN at
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.
4
.
to highlight the
to select it.