Turning The Ic Recorder On; Turning The Power On; Turning The Power Off; Using The Standby Function - Sony ICD-TX50 Operating Instructions Manual

0
0
Preparing the Recorder

Turning the IC Recorder On

Turning the power on

Slide and hold the POWER•HOLD switch in the direction of "POWER" until
the window display appears. The IC recorder is turned on.

Turning the power off

Slide and hold the POWER•HOLD switch in the direction of the "POWER"
until the "Power Off " animation is displayed. The IC recorder is turned off.

Hint
If there is no operation attempted for approximately 5 seconds in the stop mode, the
display turns off automatically (in the power saving mode). If there is no further operation
attempted for approximately 10 minutes, the IC recorder turns off completely (automatic
power‑off function).

Using the standby function

Slide the POWER•HOLD switch in the direction of "HOLD" in the stop mode.
The IC recorder enters the standby mode, minimizing the battery consumption
of the IC recorder. You can resume operations immediately after you release
the HOLD status by sliding the POWER•HOLD switch in the direction of
"POWER. " This function is useful when you want to wake up the IC recorder
quickly.

Hint
In the normal stop mode, the IC recorder turns off automatically if there is no operation
attempted for 10 minutes. In the standby mode, on the other hand, the IC recorder turns
off automatically if there is no operation attempted for 24 hours.