Preventing Unintentional Operations (Hold) - Sony ICD-TX50 Operating Instructions Manual

1
1
Preparing the Recorder

Preventing Unintentional Operations (HOLD)

You can disable all the buttons (HOLD) in order to prevent unintentional
operations when you carry the IC recorder, etc.
To disable the button operations (HOLD status)
Slide the POWER•HOLD switch in the direction of "HOLD" to disable the
buttons while the power is on.
"HOLD" and the current time will appear for approximately 3 seconds,
indicating that all the button operations are disabled.
To enable the button operations
Slide the POWER•HOLD switch towards the center.
Note
When the HOLD function is activated during recording, all the button operations are
disabled. To stop recording, cancel the HOLD function first.

Hint
Even if the HOLD function is activated, you can stop the alarm playback by pressing any
button. (You cannot stop normal playback.)