Table of Contents
Advertisement
2.4 MENU LANG
MENU LANG: Sets the preferred
menu language as the default when
playing DVD. (If DVD support these
languages)
2.5 EXIT SETUP
3.AUDIO SETUP PAGE
3.1 AUDIO OUTPUT
AUDIO OUT: Sets the audio outputs.
3.2 KEY
KEY: Use the Up and Down arrow
button to move acroll and adjust the
key.
22
www.PyleUSA.com
4. VIDEO SETUP PAGE
4.1 BRIGHTNESS
BRIGHTNESS: Sets the brightness
level of video output.
4.2 CONTRAST
CONTRAST: Sets the contrast level of
Video output
4.3 HUE
HUE: Sets the hue value ofthe Video.
4.4 SATURATION
SATURATION:
Sets the video saturation.
5. SPEAKER SETUP
5.1 SPEAKER SETUP PAGE
DOWN MIX MODE: sets front speakers
to LT/RT STEREO, V SURR
•
The rst 3 settings (LT/RT, STEREO, V
SURR) downmix the sound Signal for
2-Speakers. This setting allows you
to enjoy a surround sound effect
with only two speakers. For this
reason a setup for additional speakers
(described in the following sections)
is disabled when DOWNMIX MODE
is set to these settings.
6. DIGITAL SETUP PAGE
6.1 OPMODE
OP MODE: This can set the type of
output and adjust audio frequency.
6.2 DYNAMIC RANGE
DYNAMIC RANGE: When LINE OUT is
selected, choose this setting to adjust
the line out ratio and get di erent
effect. If adjusting to FULL, the audio
signal peak value will be the minimum;
while adjusting to OFF, maximum.
6.3 DUAL MONO
DUAL MONO: If your ampli er/de-
coder has Dolby Digital output, you
may select stereo, left mono, right
mono, or mixed mono mode for your
ampli er decoder.
www.PyleUSA.com
23
Advertisement
Table of Contents
