Altimeter And Barometer; History; Using History; Multisport History - Garmin Fenix 6 Pro Series Owner's Manual

When you deviate from the heading, the compass displays
the direction from the heading and degree of deviation.

Altimeter and Barometer

The device contains an internal altimeter and barometer. The
device collects elevation and pressure data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated
page 38). You can press
widgets to open the altimeter or barometer settings quickly.

History

History includes time, distance, calories, average pace or speed,
lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.

Using History

History contains previous activities you have saved on your
device.
The device has a history widget for quick access to your activity
data (Widgets, page 36).
1
From the watch face, hold MENU.
2
Select History > Activities.
3
Select an activity.
4
Press .
5
Select an option:
• To view additional information about the activity, select All
Stats.
• To view the impact of the activity on your aerobic and
anaerobic fitness, select Training Effect
Effect, page 18).
• To view your time in each heart rate zone, select Heart
Rate

(Viewing Your Time in Each Heart Rate Zone,

page 32).
• To select a lap and view additional information about each
lap, select Laps.
• To select a ski or snowboard run and view additional
information about each run, select Runs.
• To select an exercise set and view additional information
about each set, select Sets.
• To view the activity on a map, select Map.
• To view an elevation plot for the activity, select Elevation
Plot.
• To delete the selected activity, select Delete.

Multisport History

Your device stores the overall multisport summary of the activity,
including overall distance, time, calories, and optional accessory
data. Your device also separates the activity data for each sport
segment and transition so you can compare similar training
activities and track how quickly you move through the
transitions. Transition history includes distance, time, average
speed, and calories.
Viewing Your Time in Each Heart Rate Zone
Viewing your time in each heart rate zone can help you adjust
your training intensity.
1
From the watch face, hold MENU.
2
Select History > Activities.
3
Select an activity.
4
Select Heart Rate.
32
(Altimeter Settings,
from the altimeter or barometer
(About Training

Viewing Data Totals

You can view the accumulated distance and time data saved to
your device.
1
From the watch face, hold MENU.
2
Select History > Totals.
3
If necessary, select an activity.
4
Select an option to view weekly or monthly totals.

Using the Odometer

The odometer automatically records the total distance traveled,
elevation gained, and time in activities.
1
From the watch face, hold MENU.
2
Select History > Totals > Odometer.
3
Press UP or DOWN to view odometer totals.

Deleting History

1
From the watch face, hold MENU.
2 Select History > Options.
3
Select an option:
• Select Delete All Activities to delete all activities from the
history.
• Select Reset Totals to reset all distance and time totals.
NOTE: This does not delete any saved activities.

Customizing Your Device

Activities and App Settings

These settings allow you to customize each preloaded activity
app based on your needs. For example, you can customize data
pages and enable alerts and training features. Not all settings
are available for all activity types.
Hold MENU, select Activities & Apps, select an activity, and
select the activity settings.
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over ground.
3D Speed: Calculates your speed using your elevation change
and your horizontal movement over ground
Distance, page 35).
Accent Color: Sets the accent color of each activity to help
identify which activity is active.
Alerts: Sets the training or navigation alerts for the activity.
Auto Climb: Enables the device to detect elevation changes
automatically using the built-in altimeter.
Auto Lap: Sets the options for the Auto Lap feature
page 34).
Auto Pause: Sets the device to stop recording data when you
stop moving or when you drop below a specified speed
(Enabling Auto Pause, page
Auto Rest: Enables the device to automatically detect when you
are resting during a pool swim and create a rest interval
(Auto Rest, page 6).
Auto Run: Enables the device to detect ski runs automatically
using the built-in accelerometer.
Auto Scroll: Enables you to move through all of the activity data
screens automatically while the timer is running
Scroll, page 35).
Auto Set: Enables the device to start and stop exercise sets
automatically during a strength training activity.
Background Color: Sets the background color of each activity
to black or white.
(3D Speed and
(Auto Lap,
35).
(Using Auto
History