Download
Share
Print this page
Panduit Atlona Omega AT-OME-EX-TX Installation Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Transmitter
  5. Atlona Omega AT-OME-EX-TX
  6. Installation manual

Panduit Atlona Omega AT-OME-EX-TX Installation Manual

4k/uhd hdmi over hdbaset transmitter with usb, control, and poe
Hide thumbs Also See for Atlona Omega AT-OME-EX-TX:

Advertisement

Quick Links

Download this manual
Omega
4K/UHD
™
HDMI Over HDBaseT Transmitter with USB, Control, and PoE
AT-OME-EX-TX
The Atlona AT-OME-EX-TX is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus
embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters).
Part of the Omega™ Series of integration products for modern AV communications and
collaboration, the OME-EX-TX is HDCP 2.2 compliant and transmits IR, RS-232, and IP control
signals.With a matching HDBaseT receiver, the integrated USB extension is ideal for software
video conferencing and the use of touch or interactive displays. The OME-EX-TX includes a USB
host for a PC, plus two peripheral devices such as a speakerphone, microphone, or keyboard
and mouse. This transmitter is ideal for use with Omega Series receivers as well as switchers
with HDBaseT inputs. Also available is the OME-EX-KIT which includes the OME-EX-TX and
OME-EX-RX.*
Package Contents
1 x AT-OME-EX-TX
1 x Captive screw connectors, 4-pin
2 x Mounting plates
2 x Mounting screws
1 x Installation Guide
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-TX for the
latest firmware updates and User Manual.
* The AT-OME-EX-TX is not compatible with the AT-UHD-HDVS-300 system for extending USB.
1
Installation Guide
AT-OME-EX-TX

Advertisement

loading

Related Manuals for Panduit Atlona Omega AT-OME-EX-TX

Summary of Contents for Panduit Atlona Omega AT-OME-EX-TX

  • Page 1 Installation Guide AT-OME-EX-TX Omega 4K/UHD ™ HDMI Over HDBaseT Transmitter with USB, Control, and PoE AT-OME-EX-TX The Atlona AT-OME-EX-TX is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). Part of the Omega™...
  • Page 2 Installation Guide AT-OME-EX-TX OMEGA DEVICE HOST LINK Front LINK OMEGA AT-OME-EX-RX AT-OME-EX-TX RS-232 IR HDBaseT OUT HDMI IN Rear Connect a category cable from this port to a network switch. This cable provide IP pass- through transport control from a control system to the display (sink) device connected to the receiver.
  • Page 3 Installation Guide AT-OME-EX-TX RS-232 and IR The AT-OME-EX-TX provides pass-through transport of RS-232 protocol and/or IR over HDBaseT, which allows communication between a control system and an RS-232 or IR device. This step is optional. Use wire strippers to remove a portion of the cable jacket. Remove at least 3/16”...

  • Page 4: Installation

    Installation Guide AT-OME-EX-TX Installation Connect a UHD/HD source to the HDMI IN port. Connect a USB cable from the host computer to the HOST port. Connect up to two USB devices (speakerphone, etc.) to the DEVICE ports. These ports provide 2.5 W per USB device interface. Connect a category cable, from the HDBaseT OUT port on the transmitter, to the HDBaseT IN port on the receiver.

  • Page 5: Led Indicators

    Installation Guide AT-OME-EX-TX LED Indicators The PWR and LINK LED indicator on both the transmitter and receiver unit provides basic information on the current status of the AT-OME-EX-TX. Description Solid green Unit is powered. Unit is not powered. • Make sure that the category cable between the HDBaseT IN port on the transmitter and the HDBaseT OUT port on the receiver is secure.

  • Page 6: Mounting Instructions

    Installation Guide AT-OME-EX-TX Mounting Instructions The AT-OME-EX-TX provides two mounting brackets, which can be used to attach the unit to any flat surface. Use the two enclosure screws, on the sides of the unit to attach the mounting brackets. Using a small Phillips screwdriver, remove the two screws from the left side of the enclosure.
  • Page 7 Installation Guide AT-OME-EX-TX Repeat these steps to attach the second mounting bracket to the opposite side of the unit. Mount the unit to a flat surface using the oval-shaped holes, on each mounting bracket. If using a drywall surface, a #6 drywall screw is recommended. L I N V I C...
  • Page 8 Installation Guide AT-OME-EX-TX Analyzer Software The Analyzer software provides HDBaseT testing, debugging, and firmware update utilities. The software can be downloaded from the Resource tab located at https://atlona.com/product/ at-ome-ex-kit/. HDBaseT Testing Launch the Analyzer software. Make sure the system is powered and the transmitter and receiver are connected using the HDBaseT OUT and HDBaseT IN ports.
  • Page 9 Installation Guide AT-OME-EX-TX Debug Launch the Analyzer software. Make sure the system is powered and the transmitter and receiver are connected using the HDBaseT OUT and HDBaseT IN ports. Connect an active source to the transmitter and an active display to the receiver. Set the source to the highest resolution.

  • Page 10: Updating The Firmware

    Installation Guide AT-OME-EX-TX Updating the Firmware Requirements: • AT-OME-EX-TX • Firmware file • Computer running Windows • USB-A to USB mini-B cable NOTE: The update process can take up to five minutes to complete. Disconnect power from the unit. Connect a USB-A to USB mini-B cable between the PC and the FW port on the unit. Power the unit.
  • Page 11 Installation Guide AT-OME-EX-TX Notes...
  • Page 12 Installation Guide AT-OME-EX-TX Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.