Summary of Contents for Panduit ATLONA Omega AT-OME-TX11-WP
Page 1
Installation Guide AT-OME-TX11-WP Omega 4K/UHD ™ Wallplate Transmitter for HDMI with USB AT-OME-TX11-WP The Atlona AT-OME-TX11-WP is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus embedded audio over distances up to 330 feet (100 meters). It features a US one-gang, wallplate form factor, and includes interchangeable black and white wallplates and faceplates.
Page 2
Installation Guide AT-OME-TX11-WP AT-OME-TX11-WP CAN ICES-003(A) /NMB-00(A) HDBaseT LINK HDMI This LED indicator glows solid green Connect an HDMI cable from this port to a when the unit is powered. Refer to UHD/HD source. LED Indicators (page 5) for more HDBaseT OUT information.
Page 3
Installation Guide AT-OME-TX11-WP Faceplate Removal and Assembly Removal of the faceplate requires that the AT-OME-TX11-WP be disassembled from the electrical box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate. Unscrew the four Phillips-head screws from the sides of the faceplate, as shown: 1 - W E - T - O M...
Installation Guide AT-OME-TX11-WP Installation Connect an HDMI cable from the UHD/HD source to the HDMI port. Connect a category cable, from the HDBaseT OUT port on the rear of the AT-OME-TX11- WP, to the HDBaseT IN port on the receiver. Cable Recommendation Guidelines Refer to the tables below for recommended cabling when using Altona products with HDBaseT.
Installation Guide AT-OME-TX11-WP LED Indicators The PWR and LINK LED indicator on both the transmitter and receiver unit provides basic information on the current status of the AT-OME-TX11-WP. Description Solid green Unit is powered. Normal operating mode. Blinking green Unit is in firmware update mode. Refer to Updating the Firmware (page 6) for more information.
Installation Guide AT-OME-TX11-WP Updating the Firmware Requirements: • AT-OME-TX11-WP • Firmware file • Computer running Windows • USB-A to USB-C cable or USB-C to USB-C cable NOTE: The update process can take up to five minutes to complete. Disconnect power from the unit. Remove the faceplate to access the hidden “firmware update”...
Page 7
Installation Guide AT-OME-TX11-WP The USB Drive folder will be displayed. If this folder is not displayed, automatically, select the USB Drive drive from Windows Explorer. Delete all files from the USB Drive, if any are present. Drag-and-drop the firmware file to the drive. The PWR LED indicator, on the front panel, will flash green while the unit is being updated.
Installation Guide AT-OME-TX11-WP Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-ome-tx11-wp/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. ®...