230ft/70m. This design of HDBaseT technology allows for full usage of HDMI and controls ™ over Cat 6/6A cable. This unit can be paired with any Panduit HDBase-T receiver product. FEATURES • HDMI 1.4b, HDCP 2.2 and 1.4 • Video resolutions up to 4K2K@30Hz •...
• Dark: The Transmitter and Receiver are not connected. 9. Data Signal Indicator Lamp • Illuminate: The HDMI signal with HDCP. • Flashing: The HDMI signal without HDCP. • Off: No HDMI signal. USER MANUAL – HDBaseT Transmitter – CMHDBTBTX www.panduit.com...
4. Plug in the IR sensors (if applicable). 5. Attach the power cord to either Transmitter or Receiver (only one connection needed). 6. Power up display and source. DESCRIPTIONS Description 1 POC (Power Over Cable) Application Example USER MANUAL – HDBaseT Transmitter – CMHDBTBTX www.panduit.com...
Page 7
Description 2 Bidirectional Infrared Control Application Example Description 3 Bidirectional RS232 Control Application Example USER MANUAL – HDBaseT Transmitter – CMHDBTBTX www.panduit.com...
3, use the connectors shown in the following figure as a reference if using 089 male or female. Test the conduc tors with a multimeter to confirm termination. USER MANUAL – HDBaseT Transmitter – CMHDBTBTX www.panduit.com...
Page 9
(serial null modem wiring). This means pin 2 of the DB9 connector will connect to the Rx pin of the HDBaseT device and pin 3 of the DB9 connector will connect to the Tx pin of the HDBaseT device. USER MANUAL – HDBaseT Transmitter – CMHDBTBTX www.panduit.com...
WARRANTY Please refer to Panduit.com for the latest warranty information on products SAFETY INFORMATION To reduce the risk of electric shock, do not expose this product to rain or moisture. Do not modify the wall plug. Doing so will void the warranty and safety features.