Factory-Provided Sensors - Trane Horizon OADG Series Installation, Operation And Maintenance Manual

Installation
Figure 39. OAUTS Connection B

Factory-Provided Sensors

A discharge temperature sensor (VELSEN-0021) will be
factory-provided for field installation in the supply duct.
Refer to Figure 46, p. 61 for installation instructions.
If space control is selected, a combination space
temperature/humidity sensor (BAYSENS036A) will be
factory-provided for field installation in the space. Refer to
Figure 47, p. 62 for installation instructions.
If multi-zone VAV control is selected, a static pressure
sensor (VELCON-0350) will be factory-provided for field
installation in the supply duct or space. Refer to Figure 49,
p. 64 for installation instructions.
If modulating OA/RA dampers w/economizer and an
exhaust fan are selected, a duct static pressure sensor
(VELCON-0350) will be factory-provided for field
installation in the return duct. Refer to Figure 49, p. 64 for
installation instructions.
36 OAU-SVX006C-EN