Function
Setting SET ID
Set ID is 1 - 99.
*
* Only the saved Set ID is effective.
1. Press the MENU button, then go to OPTION with the ∧, ∨, <, >
buttons and press OK
2. Press the ∧, ∨ buttons to go to SET ID and press OK .
Setting the Name of a Connected Device
* You can set the name of an external device.
1. Press the MENU button, then go to Options with the ∧, ∨, <, >
buttons and press OK
2. Press the ∧, ∨ buttons to go to Input Label and press OK
3. Press the ∧, ∨ buttons to select an input.
4. Press the <, > buttons to select a device.
5. Press the ∧, ∨ buttons to select Close and press OK
ꔈPress the BACK button to exit the menu screen.
Setting Power Sound
* You can turn the opening sound on or off.
1. Press the MENU button, then go to Options with the ∧, ∨, <, > buttons
.
and press OK
2. Press the <, > buttons to go to Power Sound.
ꔈ You can select this function through the MENU button.
ꔈ Press the BACK button to exit the menu screen.
38
.
.
OPTION
Blank Image
Camera Calibration
Lamp Mode
High Altitude
Network Setting
Set ID
Input Label
Power Sound
OPTION
Blank Image
.
Camera Calibration
Lamp Mode
High Altitude
Network Setting
Set ID
Input Label
Power Sound
.
OPTION
Blank Image
Camera Calibration
Lamp Mode
High Altitude
Network Setting
Set ID
Input Label
Power Sound
ꔂ Move ꔉ OK
▲
: Blue
: Normal
: Off
ꔉ
1
: On
ꔂ Move ꔉ OK
▲
ꔗ
ꔃ
Video
: Blue
Component
: Normal
RGB
HDMI1
HDMI2
Close
: On
ꔂ Move ꔉ OK
▲
: Blue
: Normal
: Off
: 1
ꔉ
: On