Network Setting - LG CineBeam Laser HF80JS Owner's Manual

8

Network Setting

Network Setting
If you configure settings for the network, you can use various services such as
online contents and applications.
Setting a Wired Network
1
Connect the LAN port of the projector and the router using a LAN cable. The
router should be connected to the Internet beforehand.
2
(Q. Settings) button on the remote control and select
Press the
Network Wired Connection
connection.
• If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
Setting a Wireless Network
1
Turn on the power of the router connected to the Internet.
2
(Q. Settings) button on the remote control and select
Press the
Network Wi-Fi
connection.
3
When the network search is complete, the list of networks available for
connection is shown.
4
Select a network to connect. If your Wireless Router is password protected,
enter the password configured for the router.
(Ethernet). This will start the wired network
Connection. This will start the Wireless network