Set Id; Network Setup - LG BX327 Owner's Manual

Function

SET ID

1. Press the MENU button. Then, move to OPTION with the ∧, ∨,
＜, ＞ buttons and press the
2. Press the ∧, ∨ buttons to move to Set ID and press the
button.
3. Press the ＜, ＞ button to select your desired number. Press the
OK button to save the selected number.
• The adjustment range of Set ID is 1~99.
• Only the projector with the specified ID number will operate from the
remote control.
• Press the BACK button to exit the menu screen.

Network Setup

< NOTICE >
▪ Use a standard LAN cable with this Projector. Cat5 or better with a RJ45 connector.
▪ Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the
player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem.
Then power on and/or connect the power cable again.
▪ A 10 Base-T or 100 Base-TX LAN port is required for connection to this Projector. If your internet service does not allow for
such a connection, you will not be able to connect the Projector.
▪ To connect to the wireless router, a router that supports wireless connection is necessary, and the wireless connection function
of the corresponding router must be activated.
▪ To connect to a wireless router, verify the SSID and security setting of the wireless router. Please refer to the user guide of the
corresponding router for SSID and security setting of the wireless router.
▪ When Ad-hoc is used, it may not be able to connect according to the device (for example : notebook computer) that is con-
nected.
▪ The connection method may vary according to the manufacturer of the wireless router.
< How to connect >
Connect the LAN of the projector and the LAN port of the PC or network with a LAN cable (Cross cable).
LAN
AUDIO
IN
22
OK button.
< PC >
LAN Cable
OPTION
Menu Language
Blank Image
OK
Screen Capture
Lamp Mode
Monitor Out
Set ID
Network Setting
High Altitude
3D Mode
LAN
AUDIO
IN
LAN Cable
Connecting PC
ꔂMove ꔉOK
: English
: Blue
: Normal
: RGB1
: 1
: Off
< Router >